|
>>
Stell Doors
>> TECHNICAL
PROPERTIES
a) HIGH-TECH TYPE STEEL DOOR TECHNICAL PROPERTIES
 
·
Steel frame manufactured by mounting mono-block 1.5mm sheet between
1.5mm+1.5mm DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each
omega shaped steel supports mounted from one end to other inside the
wing,the resistance of the wing against impact has been increased.The
complete wing length is 93mm.
· Modular chassis
manufactured from 2.5mm DIN EN 101 6112 DKP sheet metal composed of 6
pieces.Assembly between the wall and chassis of each chassis part by steel
studs of 14mm at 13 points.
· Frame that
moves the barrel by Wheel system formed from stainless steel key neck and
in 4 cm
width assembled without clearance and that establishes the operation of
from one end to other locking system of steel frame to door wing.
· Channel system
that can self integrated and locks from one in to other from the hinge
side of door when the door is closed.
· Electrostatic
powder painted frame and door side laths.
· Omega system
formed against bending across the lock at safe.
· Complete wooden
appearance on wing ,wooden coating application any requested color and
model over MDF in 6mm thickness.
· Inside the wing
fiber at high densityi heat and sound insulation filler.
· Locking system
equal to 400 points.
· Mono-hoked
locking system.Cylinder balled chrome coated lock resistant against boring
and 5 each a cipher pinned cerman with electronic card, 10 each ball
pavilion barrel system.
· Movable headed
special bushed, steel an adjustable fixed at 3 points single and double
imported door hinges.
· Hidden safety
clapms made out of stainless steel thay obstructs the opening of door by 5 mm intervals.
· Complete wooden
appearance.
· DIN EN 1.4301
304 stainless steel lath around the door wing upon request.
· Production
according to measurement.
· 5 years
guarantee.
· 24 hours 0543 SOS
service from every point of Turkey.
b) MONO-BEKA TYPE STEEL
DOOR TECHNICAL PROPERTIES
· Steel
frame manufactured by mounting mono-block 1.5mm sheet between 1.5mm+1.5mm
DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each omega shaped
steel supports mounted from one end to other inside the wing,the
resistance of the wing against impact has been increased.The complete wing
length is 70mm.
· The
door frame manufactured from 2mm DIN EN101-91 6112 DKP sheet metal and
that can be adjustable according to wall thickness.In addition, inside the
frame safety aquipment formed by omegas against tension.
· Special
safety pins formed by the hinges.
· Electrostatic
powder painted frame and door side laths.
· Complete
wooden appearance on wing ,wooden coating application any requested color
and model over MDF in 6mm thickness.
· Inside
the wing fiber at high densityi heat and sound insulation filler.
· Locking
system from 11 points.
· Cylinder
balled chrome coated steel shafted lock resistant against boring and 5
each a cipher pinned cerman with electronic card, 10 each ball pavilion
barrel system.
· Upon
request mono-hooked lock alternative
· Movable
headed special bushed, steel an adjustable fixed at 3 points single and
double imported door hinges.
· Hidden
safety clapms made out of stainless steel thay obstructs the opening of
door by 5 mm
intervals.
· DIN
EN 1.4301 304 stainless steel lath around the door wing upon request.
· Production
according to measurement.
· Assembly
with tension method.
· 5
years guarantee.
· 24
hours 0543 SOS service from every point of Turkey.
c) MONO-CLASSIC
TYPE STEEL DOOR TECHNICAL PROPERTIES
· Steel
frame manufactured by mounting mono-block 1.5mm sheet between 1.5mm+1.5mm
DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each omega shaped
steel supports mounted from one end to other inside the wing,the
resistance of the wing against impact has been increased.The complete wing
length is 70mm.
· Modular
chassis manufactured from 2mm DIN EN 101 6112 DKP sheet metal composed of
6 pieces.Assembly between the wall and chassis of each chassis part by
steel studs of 14mm at 13 points.
· Channel
system that can self integrated and locks from one in to other from the
hinge side of door when the door is closed.
· Electrostatic
powder painted frame and door side laths.
· Omega
system formed against bending across the lock at safe.
· Complete
wooden appearance on wing ,wooden coating application any requested color
and model over MDF in 6mm thickness.
· Inside
the wing fiber at high densityi heat and sound insulation filler.
· Locking
system equal to 208 points.
· Cylinder
balled chrome coated steel shafted lock resistant against boring and 5
each a cipher pinned cerman with electronic card, 10 each ball pavilion
barrel system.
· Upon
request mono-hooked lock alternative
· Movable
headed special bushed, steel an adjustable fixed at 3 points single and
double imported door hinges.
· Hidden
safety clapms made out of stainless steel thay obstructs the opening of
door by 5 mm
intervals.
· Complete
wooden appearance.
· DIN
EN 1.4301 304 stainless steel lath around the door wing upon request.
· Production
according to measurement.
· 5
years guarantee.
· 24
hours 0543 SOS service from every point of Turkey.
d) MONO-PETEK
TYPE STEEL DOOR TECHNICAL PROPERTIES
· Steel
frame manufactured by mounting mono-block 1mm pieced sheet between 1mm+1mm
DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each omega shaped
steel supports mounted from one end to other inside the wing,the
resistance of the wing against impact has been increased.The complete wing
length is 70mm.
· The
door frame manufactured from 1.5mm DIN EN101-91 6112 DKP sheet metal and
that can be adjustable according to wall thickness.In addition, inside the
frame safety aquipment formed by omegas against tension.
·
Special safety pins formed by the hinges.
·
Electrostatic powder painted frame and door side laths.
·
Complete wooden appearance on wing ,wooden coating
application any requested color and model over MDF in 6mm thickness.
·
Inside the wing fiber at high densityi heat and sound insulation filler.
·
Locking system from 11 points.
·
Cylinder balled chrome coated steel shafted lock resistant against boring and
5 each a cipher pinned cerman with electronic card, 10 each ball pavilion
barrel system.
·
Movable headed special bushed, steel an adjustable fixed at 3 points
single and double imported door hinges.
·
Hidden safety clapms made out of stainless steel thay obstructs the
opening of door by 5 mm
intervals.
·
Production according to measurement.
·
Assembly with tension method.
·
5 years guarantee.
·
24 hours 0543 SOS service from every point of Turkey.
e) MULTİ-BEKA
TYPE STEEL DOOR TECHNICAL PROPERTIES
· Steel
frame manufactured by mounting mono-block 1.5mm sheet between 1.5mm+1.5mm
DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each omega shaped
steel supports mounted from one end to other inside the wing,the
resistance of the wing against impact has been increased.The complete wing
length is 70mm.
·
The door frame manufactured from 2mm DIN EN101-91 6112 DKP sheet metal and
that can be adjustable according to wall thickness.In addition, inside the
frame safety aquipment formed by omegas against tension.
·
Special safety pins formed by the hinges.
·
Electrostatic powder painted frame and door side laths.
·
Complete wooden appearance on wing ,wooden coating application any requested
color and model over MDF in 6mm thickness.
·
Inside the wing fiber at high densityi heat and
sound insulation filler.
·
Locking system from 20 points.
·
Multi-Lock mechanism that allows locking from 16 points.Cylinder balled
chrome coated steel shafted lock resistant against boring and 5 each a
cipher pinned cerman with electronic card, 10 each ball pavilion barrel
system.
·
Upon request mono-hooked lock alternative
·
Movable headed special bushed, steel an adjustable fixed at 3 points
single and double imported door hinges.
·
Hidden safety clapms made out of stainless steel thay obstructs the
opening of door by 5 mm
intervals.
·
DIN EN 1.4301 304 stainless steel lath around the door wing upon request.
·
Production according to measurement.
·
Assembly with tension method.
·
5 years guarantee.
·
24 hours 0543 SOS service from every point of Turkey.
f) MULTİ-CLASSIC TYPE STEEL DOOR TECHNICAL
PROPERTIES
· Steel
frame manufactured by mounting mono-block 1.5mm sheet between 1.5mm+1.5mm
DIN EN101-91 6112 DKP sheet metal chassis.With the 2 each omega shaped
steel supports mounted from one end to other inside the wing,the
resistance of the wing against impact has been increased.The complete wing
length is 70mm.
·
Modular chassis manufactured from 2mm DIN EN 101 6112 DKP sheet metal
composed of 6 pieces.Assembly between the wall and chassis of each chassis
part by steel studs of 14mm at 13 points.
·
Channel system that can self integrated and locks from one in to other
from the hinge side of door when the door is closed.
· Electrostatic
powder painted frame and door side laths.
· Omega
system formed against bending across the lock at safe.
· Complete
wooden appearance on wing ,wooden coating application any requested color
and model over MDF in 6mm thickness.
· Inside
the wing fiber at high densityi heat and sound insulation filler.
· Locking
system equal to 216 points.
· Multi-Lock
mechanism that allows locking from 16 points.Cylinder balled chrome coated
steel shafted lock resistant against boring and 5 each a cipher pinned
cerman with electronic card, 10 each ball pavilion barrel system.
· Upon
request mono-hooked lock alternative
· Movable
headed special bushed, steel an adjustable fixed at 3 points single and
double imported door hinges.
· Hidden
safety clapms made out of stainless steel thay obstructs the opening of
door by 5 mm
intervals.
· Complete
wooden appearance.
· DIN
EN 1.4301 304 stainless steel lath around the door wing upon request.
· Production
according to measurement.
· 5
years guarantee.
· 24
hours 0543 SOS service from every point of Turkey.
www.asdcelikkapi.com
|