|
>>
In-Doors
a) American Door Panels
|
|
|
Amerikan Kapı I
|
|
|
|
Amerikan Kapı II
|
|
|
b) Naturel Massive Covered In-Doors
|
|
|
Doğal Kaplamalı Masif Kapı I
|
|
|
|
Doğal Kaplamalı Masif Kapı II
|
|
|
c) Laminated Covered In-Doors
|
|
|
Laminat Kaplamalı İç Mekan Kapıları
|
|
|
>> TECHNICAL
PROPERTIES
a) AMERİCAN PANEL INTERNAL DOOR TECHNICAL PROPERTIES
·
The
door wing has been manufactured from wooden carcass artifical dried white spruce.The
knurled and non-knurled wooden timber is undergone finger-joint
application.By this method, the door’s bending and rotation risk is
eliminated.
·
The
wing thickness is manufactured as 42mm and non-rebated.
·
The
top of the wooden construction is 3.2mm HDF American pressed.The imported
panels are wood patterned and there are 2,3,4,6 hubs.
·
Between
the wing construction craft honeycomb is being used as filling material.
·
Glazing
sizes and lath could be assembly on wing upon request.
·
The
chassis frame pieced white spur,top and bottom parts are manufactured as
3.2mm HDF American panel pressed
·
Jambs
are channel interlaced and cap combinations are 90°.They are manufactured
from wooden patterned MDF material
·
The
gasket placed in the channel formed at chassis establishes the heat and
sound insulation at door complex
·
According
to the order the measurement is taken at place and special production is
made
·
The
frames are sealed to the wall by polyurethane foam.The jambs are combined
the frame by silicone.It has the dismantling property with roll back
·
Paint
application is made the wing sides and the visible parts at frame
·
Cellulusic
and sanded surface colors application is made in colors selected from
color cartel.
·
2
years quarantee.
b) MASSIVE INTERNAL DOOR WITH NATURAL COATING TECHNICAL
PROPERTIES
·
The door wing has been manufactured from wooden carcass artifical dried
white spruce.The knurled and non-knurled wooden timber is undergone
finger-joint application.By this method, the door’s bending and rotation
risk is eliminated.
·
The wing thickness is manufactured as 42mm and non-rebated.
·
The top of the wooden construction is coated with natural coating application
over 6mm MDF panel.There are natural coating alternatives as oak,walnut
and venge.
·
Between the wing construction craft honeycomb is being used as filling
material. When requested perforated chip plate screen filling or massive
woden screen filling types can be used.
·
Glazing sizes and lath could be assembly on wing upon request.
·
The chassis frame pieced white spur,top and bottom parts are manufactured
as 3mm MDF pressed.
·
Jambs are channel interlaced and cap combinations are 90°.They are
manufactured from 10mm MDF material.The natural coating material over MDF
is being pressed
·
The gasket placed in the channel formed at chassis establishes the heat
and sound insulation at door complex.
·
According to the order the measurement is taken at place and special
production is made.
·
The frames are sealed to the wall by polyurethane foam.The jambs are
combined the frame by silicone.It has the dismantling property with roll
back.
·
Selected paint application is made the wing sides and the visible parts at
frame.
·
2 years quarantee.
c) LAMINATE
COATED INTERNAL DOOR TECHNICAL PROPERTIES
· The
door wing has been manufactured from wooden carcass artifical dried white
spruce.The knurled and non-knurled wooden timber is undergone finger-joint
application.By this method, the door’s bending and rotation risk is
eliminated.
·
The wing thickness is manufactured as 42mm and non-rebated.
·
The top of the wooden construction over 6mm MDF laminate types will
be coated that are selected by customer and wing production will be
realized.
·
Between the wing construction craft honeycomb is being used as
filling material. When requested perforated chip plate screen filling or
massive woden screen filling types can be used.
·
Glazing sizes and lath could be assembly on wing upon request.
·
The chassis frame pieced white spur,top and bottom parts are
manufactured as 3mm MDF pressed.
·
Jambs are channel interlaced and cap combinations are 90°.They are
manufactured from 10mm MDF material.MDF plate is coated with selected
laminate material.
·
The gasket placed in the channel formed at chassis establishes the
heat and sound insulation at door complex.
·
According to the order the measurement is taken at place and
special production is made.
·
The frames are sealed to the wall by polyurethane foam.The jambs
are combined the frame by silicone.It has the dismantling property with
roll back.
·
Selected paint application is made the wing sides and the visible
parts at frame.
·
2 years quarantee.
www.asdcelikkapi.com
|